• Home
  • Schneider SW Inverter/Charger 4kW 48VDC 230VAC

Schneider SW Inverter/Charger 4kW 48VDC 230VAC

SKU: SW4048-230
Inverter/charger 4.0kW 48VDC
Conext SW is a pure sine wave, inverter/charger system. Available with DC switchgear panels, display control panel, remote monitoring and automated generator control modules. Stacking Conext SW units will double the power and coupled with XW-MPPT solar charge controllers allows for the integration of solar capacity as required. Schneider technical note 11 April 2016: It has recently come to our attention that Conext SW units operating in a “Stacking” arrangement is problematic and does not result in reliable operation. This is particularly evident when operating with inductive and capacitive loads. A “Stacking” arrangement is when two SW inverter chargers operate on the same phase with a common load, and share a common battery bank. Therefore it is our strong recommendation that “Stacking” of SW inverter chargers should not be used for any application and until we advise further.
Width [mm]341
Remote CommunicationsYes, optional accessory required
Temperature Compensated ChargingYes
Adjustable Battery Charging ParametersFully Programmable
Low Voltage Disconnect (LVD)Yes
Maximum Output Current [A DC]45
Nominal DC Voltage [V]48
CEC List Model NumberSW 4048 230
Battery TypeFlooded, GEL, AGM, Lithium, Custom
Operating Temperature Range [°C]-20°C to +60°C
Display InterfaceLED & optional display
IP RatingIP20
BrandSchneider
Weight [kg]28.1
Depth [mm]197
Height [mm]418