The CEB900AU is housed in a light weight aluminium enclosure
design to be wall mountable. This repeater is designed to be
compact and low power, with or without remote control capability,
and provides a cost-effective solution to overcoming RF
transmission dead spots in small areas or within buildings.

• CEB900AU 890-960 MHz (55 KB)
  
  

The CEB2000B is a low power, band selective repeater for increasing coverage of UMTS 2100 between a base station and
mobile subscribers. By enhancing signal strength the CEB2000B
provides increased voice quality and data speeds where it was
not previously obtainable. This repeater is designed to be compact, low power and the most cost effective solution to
overcoming RF transmission dead spots for indoor applications.

• CEB2000B 1920-2170 MHz (45 KB)
  
  

The CE2000A is a mid power channel selective repeater operating in the 2100 MHz UMTS band. Each unit has up to two individual RF duplex channels. These may be independently configured with regard to channel, frequency and gain as required. The modularity of the CE2000A series mean that all active components are contained within either the channel modules, power supply module, low noise amplifier module or control module, facilitating maintenance by module replacement if required.

• CE2000A 1920-2170 MHz (50 KB)
  
  

The CE90210A channelised repeaters operate in the 900 MHz GSM and 2100 MHz UMTS band. They offer high RF output power and are ideally suited for point-to-point or point-tomultipoint
applications to extend coverage beyond the fringe areas of the GSM/UMTS cell boundaries. This next generation includes the 2100 MHz band.

• CE90210A 890-2170 MHz (50KB)